Smart Upper Shelf Tray for Ozark Trail 12 Can Soft Sided Cooler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upper Compartment Ice Tray for Ozark Trail 12 Can Soft Sided Cooler
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This top tray emulates the function of the "SmartShelf" that other coolers offer to keep soft or dry items separate from the ice and lower items. It was designed to sit on top of the hardliner and fit standing cans below with some extra space for ice or an ice pack.
The complete file is made to be printed on larger format printers (Bambu Labs A2L, H2D, H2S). The second file is split to be printed on smaller printers like the A1 Mini, etc.
If you print the split file, print TWO of the pieces.
This is made specifically for the 12 can version of the Ozark Trail soft sided coolers. It can potentially be scaled down/up to the 6 and 18 can versions.
Settings: Print it oriented properly with the bottom on the bed and with tree supports to save filament. 15% infill with adaptive gyroid infill.
Recommended to print in PETG for added durability in the cold and for shatter resistance. PLA should be fine for most use cases.
Should use around 170g of filament for the model with extra depending on your supports and infill choice.