Gasket for Hasselblad X2D strap buckle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Insert for the Hasselblad X2D strap buckle, to safely attach Peak Design anchors.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to be able to safely attach Peak Design anchors to the strap buckles on my Hasselblad X2D camera. The buckles' edges are too sharp and might cut into the anchor ropes. There are many ways of doing this, including just wrapping some tape around the buckle, but I have a 3D printer so I designed something a little more high tech.
These should be printed in TPU, preferably at less than 0.2, for example 0.15mm Structural seems to work well. They'll take a bit of force to insert. Don't do it with the buckles mounted on the camera. I only tested with the H'Buckles from Chinotechs, but it should fit on the stick buckles as well. Might need so size adjustment in the slicer depending on the printer.
How long they will last remains to be seen...
My website: https://www.davidpichevin.com