1 / 3
Depo-Estradiol vial shim for the Vial Drawing Assist — zdjęcie 1
1 / 3

Depo-Estradiol vial shim for the Vial Drawing Assist

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A shim for Depo-Estradiol vials in a Vial Drawing Assist that ensures proper needle depth.

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
66
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

What's this then?


I wanted to use the magnetic injection and vial draw assistant devices made by madmaxx890 to make my weekly HRT routine just a tad bit easier.

I draw from Depo-Estradiol vials from Pfizer, and unfortunately, their dimesions didn't line up with any of the vial carriers that Maxx had created. Fortunately, he was kind enough to remix one to fit the 23mm diameter of the vial and share it with me.

Even so, the small diamater of the lid used by Pfizer meant that the vial could still move about vertically in the vial carrier after the cap was screwed on, resulting in the syringe needle from the injector being inserted too far into the vial, making it hard to ensure the needle would be able to get every last bit of estradiol in the vial. That was a pretty big selling point to me.

Fortunately, instead of Maxx having to remix a bunch of cap STL files, I was able to come up with a simple design that I could make in Tinkercad that would work with any lid. 

After inserting the vial into the carrier, the shim gets placed on top of vial before the cap is screwed on. With the shim, the vial is kept still, and the syringe needle is able to draw up every last bit of girl juice from the vial.


Printing

Print as oriented. I used 0.20mm Balanced to print mine, but whatever layer height you might choose shouldn't really make all that much of a difference.

No supports are needed, though you could turn them on if you wanted to make absolutely sure there were no dropped loops. It doesn't affect functionality if there are.

This can be printed in either a rigid filiment like PLA, PETG, ASA, etc. or with FLEX/TPU-95A. All of my test vials worked just fine with a rigid shim, but if you print in FLEX, you'll have a little bit of give available if the next vial you use has a little bit a different height to it. 

Tagi