Mount for Starlink Mini with bump case

I have the official Starlink bump case on my Starlink mini.  I could not find any off the shelf suction cup brackets that work with the bump case.  It's difficult to remove the bump case.  I don't really want to remove it either, it looks snazzy.  I used this bracket and two suction cup mounts to mount the Starlink Mini on the inside of the roof of my Cybertruck.  You could use two of these brackets and four suction cups for extra security.  Requires a 1/4"-20 mount on the bracket.

I used these mounts from SMALLRIG.  They are really solid, the suction cups seem to hold very well.   https://www.amazon.com/dp/B0C6KPRHCC

There are two versions of this bracket, one with 3D printed 1/4"-20 threads, one that requires a heat-set threaded insert.  The 3D printed threads work well enough if you won't be running the mounting screw in and out of the bracket several times.  Heat set threaded inserts are pretty cheap, easy to install and durable.  Ruthex sells a two different lengths, 12.7mm and 6.4mm.  Either can be used with threaded insert version of this bracket.

I printed this on a Prusa MK4S.  This model just fits on the print plate, you'll need to rotate it slightly.  If you orient the part as shown, no supports are needed.  Since this thing is "thin", it may detach from the plate while printing.