ColorMix 5-Cone Quick Calibration Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a streamlined remix of the official Prusa ColorMix Calibration Cones.
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 24
- Wydruki
- 1
- Wyświetlenia
- 107
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
Recommended Use
Ideal for rapid iteration when dialing in tool offsets before committing to larger ColorMix models. Print it, inspect the cone transitions and alignment, then adjust offsets as needed.For detailed step-by-step instructions on performing multi-tool manual calibration (including reading the comb marks and applying X/Y offset corrections relative to Tool 1) on the Prusa XL, see the official Prusa
Knowledge Base guide:
https://help.prusa3d.com/article/multi-tool-manual-calibration-xl_470560
Slicer Requirements
Open the 3MF in PrusaSlicer 2.9.6 or newer (ColorMix virtual extruders required). Compatible with Prusa XL multi-tool setups and other multi-filament/tool-changer printers that support ColorMix.Print at your preferred ColorMix settings (0.15 mm layer height works well as a starting point). Enjoy the quicker turnaround while still getting useful calibration feedback!