Rokenbok Wall and Floor Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ever wanted to mount your Rokenbok to the wall like some kind of prized taxidermy animal?
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Rokenbok Wall and Floor Mounts.
Technically either of these mounts can be used on the wall or floor just find what works best for you. The notched mount fits with beams and deck plates but isn't quite as strong as the solid version, I would only use it where necessary. Rokenbok beams are able to slide on and off the wall mounts for easier building.
Floor mounts can be printed with no supports, wall mounts print best lying flat with supports for the inserts. I got good results with PLA Tough+ and using "strength" presets in my slicer (or manually upping the infill a little bit works too).
When attaching mounts be careful not to overtighten the screws as it could cause them to crack.
Models will be updated to v2 if changes are made.