DanPistol Alternative Grips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some alternate versions of the OG DanPistol grip.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
Nothing complex, just a couple of little variations on the remixed grip by AMSPawn06 - one plain with diagonal cutouts, one with a wood grain texture and one with both. I printed my wood texture grip with LVVJ3D Teak Wood filament and hit it with a little walnut stain before clear coating.
Note; If you print either of the wood texture grips, I would recommend smoothing down the area just under neath the trigger guard notch (as that part tends to cause discomfort) and in front of the mag release so the grip texture doesn't foul the switch. Both are shown in the photos; I just used a razor and sandpaper.