CORE One L INDX: Offset Sensor Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix for parts to mount the CORE One/+ INDX FE offset sensor holder to the Core One L.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 13
- Wydruki
- 1
- Wyświetlenia
- 395
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Open Community License v1.1
Offset Sensor Holder
Based on the R1 design, sensor holder was thickened to match the higher heat bed and positioned in a way so that the sensor coil sits roughly 14.3mm (instead of 7mm) from the front edge of the head bed. This was a necessary adjustment so that the holder does not collide with the right screw guide. The right screw guide does have to be replaced with the provided angled remix!
Required hardwere
M3x8rT screw
M4x15mm screw
0.2mm nut
part ofCORE_ONE_L_INDX_offset_sensor_holder.obj, goes between Offset Sensor PCB and M3x8rT screw to prevent damage to PCB
Print settings
PETG-CF
0.4 nozzle
0.2 mm layer height
3 perimeters
15% gyroid infill
no supports
Screw Guide Front Right
Angled remix of the screw guide for the right lead screw. Drop in replacement for the original screw guide. It has been angled by 50 deg to prevent collision with the offset sentor holder.
Required hardwere
the 2 screws from the old Screw Guide
Print settings
PETG
0.4 nozzle
0.2 mm layer height
3 perimeters
15% gyroid infill
no supports
Related files
Big thanks to
the Bondtech Discord #Prusa Core One L crew:
bkerler_919019
spartan1575
wil_init