1 / 4
Suex VR Color ring & picatinny rail — zdjęcie 1
1 / 4

Suex VR Color ring & picatinny rail

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Color ring and picatinny rail for the DPV Suex VR Nemo/Quantum/Voyager

Ocena
0 / 5
Polubienia
1
Pobrania
22
Wydruki
0
Wyświetlenia
114
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Color ring for the Suex VR Nemo/Quantum/Voyager series (https://www.suex.it/en/series/vr-series-en/).

I wanted a custom ring for my scooter with my name on it, but could not find a model online. I also made it so I can attach an action cam clip. Based on my own measurements.

The hole for the LED might be slightly misaligned as you can see on the photos (or it might just be a bad print ... supports fell over)

It is probably possible to extend the model a bit for other attachments, I just haven't gotten there yet.

I have only done one full print of the current design with eSUN ASA+, and it seems to fit quite nice. I tried a print with 0.75mm smaller diameter and I still got it on, but it was a reaaaallly snug fit so I increased it to what it is now.

Added picatinny rail, model generated via Parametric Picatinny/NATO rail v2.1 from @Herbert_W_320910.

NB! The model is upside down in relation to how the scooter usually stands, so if you want to embed text be sure to put it upside down. And if you want a font that matches the SUEX logo Phoenicia Lower Case seems to be very similar.

Tagi