INDX nozzle holder for skådis v2

New version 2!

A nozzle holder for INDX. Consist of two parts - the fastener hooked to the Skådis panel with a Low Profile T-clip and the holder itself.

Magnets keep the holder closed when not in use.

To get your nozzle, pull out, flip and extract nozzle. To close, flip and push back. It will lock magnetically.

Keeps dust from your nozzles while having quick access.

Contains holders with text for 0.25, 0.4, 0.4 HF, 0.5 HF, 0.6 HF, 0.8 HF and 1.0 HF.

Print settings

• Material: PLA or PETG. Up to you. I used eSUN PLA+.

• Layer height: 0.2 or 0.25. I used 0.25

• Infill: Whatever rocks your boat. I used 10% recteliniar

• Walls/perimeters: 2 or 3. I used 3.

• Top/bottom layers: 4 or more. Up to you. I used 4 and 5.

• Orientation on plate: Hoder: Text-side down. Fastener: Backside down - flat on «knob»

• Supports: Paint on support for holder and backside. Use interface-layer for faster print. I used PETG as interface layer and PLA for support and temperature. Recomended to use «Snug» and «0 (soluble)» 

• Quantity: As many fasteners as holders.

Recomended hardware

• 5x4 cylindrical magnet

• T-clip (Low Profile - https://www.printables.com/model/472294-skadis-t-clip-system-low-profile-flush-mount-clips)

Assembly / how to use

1. Press magnet into position. Make sure the magnets actually attract before commiting

2. T-clip the fastener in place on your Skådis

3. Press the holder into the track in the fastener.

4. Place the nozzle

5. Use.

Version 2

Changes since version 1:

Fastener-part:

• Removable lock-piece on the back. This is held in place with M3x6 or M3x8 socket head bolt, preferrably black magnetic one. It replaces one magnet. Saves a whole lot of support.

Adjustment to holder:

• Removed top piece and made place for M3x10 or M3x12 bolt. Makes it easier to attach.

• Added symbol for CHT and std.