1 / 2
Nikon Coolscan V ED Rear Door Cover for full roll mod — zdjęcie 1
1 / 2

Nikon Coolscan V ED Rear Door Cover for full roll mod

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Parts needed to add a door to the back of a Coolscan V ED to enable full roll scanning

Ocena
0 / 5
Polubienia
1
Pobrania
18
Wydruki
0
Wyświetlenia
110
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Note: It's recommended to print the rigid parts with a 0.2mm nozzle, but 0.4 will work okay too.

Do you want to scan a whole roll, uncut with your Coolscan V? This is how to do it!

What you need:

Next you will need to cut a hole into the back of your scanner. Intimidating, I know. You'll need to disassemble the scanner almost entirely to get the bent sheet metal panel out for cutting. I used a dremel for a rough cut, followed by filing the rest manually. I printed the template from coolscan-mods and it worked great:

Next you need to drill and tap some M3 threads into the back panel:

Once that's done, test fit the 3D printed parts I've uploaded here. The two rigid parts are a tight snap fit, but I added a small amount of glue as extra insurance. The door itself is printed out of TPU and secured with two M2 screws so it stays fixed to the scanner.

Tagi