SV08 MAX Yavoth Toolhead Cartographer Mount with X Endstop

This is to complement the Yavoth toolhead remix for the SV08 MAX made by 3DPrintDemon. I've heard about too many issues with the BTT Eddy Duo, so I decided to do the extra work to get a Cartographer mounted to his design. There is also no provision for an X endstop switch in his design, so I added that as well. This is the result.

I've printed and used this mount on my own printer and can state that it works quite well. Please note that the X endstop sticks out the minimal distance to maximize X travel, so if your toolhead cable bundle from the EBB36 is thick or mislocated, the cables will hit the gantry before the limit switch is triggered. You can move the cables around a bit, shim the limit switch out - it's a friction fit - or place something on the limit switch “bumper pad" on the gantry to thicken it by a few millimeters. Old chewing gum, duck feathers, whatever works.

Support is not required, but you may find better results if using it depending on your filament. I printed mine out of PA12-CF "because I had it". The limit switch pocket is purpose-made to be very tight and will most likely take a bit of X-Acto knife work to clean up for a perfect fit. I figured this was preferable over needing glue, as the switches seem to have a bit of variation in their size.

For reference, this is the mini-microswitch I used: https://www.amazon.com/dp/B088W8WMTB?ref=ppx_yo2ov_dt_b_fed_asin_title

I've included both the STEP file and FCStd FreeCAD project file in case you want to modify for your own use. I hope this saves at least one other person a few hours. :)