Prusa INDX tool dock thimble for 5mm magnet

Remoddeled the Prusa provided thimble for the INDX tool dock to use a 5x8,47mm magnet which comes with the dock hardware kit from Bondtech. Prusa/Bondtech used a 7x8mm magnet in the thimble for the FE edition of INDX (as well as the Prusa version I assume, as the model is from Prusa's partlist).

I tested calibration and tool changes and got no issue with the smaller sized magnet.
Also tested out of spec springs for this (regarding the wire diameter/spring strength). No issues. 

I used those:
https://supermagnetic.de/neodym-magnete/scheibenmagnete/stabmagnete-5x8-47-mm/
but you can probably get away with standard 5x8mm from China as well
https://de.aliexpress.com/item/1005010132043505.html.

Bondtech kit - Be aware, you can only use the magnets from this for Prusa/FE INDX, the spring and screw are the wrong size for the Core One.
https://www.bondtech.se/product/indx-tool-dock-hardware-accessories/?v=5f02f0889301

Required springs/magnets for Core One INDX FE dock:

• thimble spring- 0,5 × 8,5 × 30 × 15
  Basically a weaker spring with 8-9mm OD and 30mm length
  https://de.aliexpress.com/item/1005005312536098.html

• thimble magnet - 5x8,47mm or 5x8mm
  https://supermagnetic.de/neodym-magnete/scheibenmagnete/stabmagnete-5x8-47-mm/
  https://de.aliexpress.com/item/1005010132043505.html
  

• dock springs (x2) - 0,63 × 5 × 15 × 11
  stiffer springs with 5mm OD and 15mm length
  https://de.aliexpress.com/item/1005005402083863.html

• dock magnets (x2) - 3x8mm (officially N48, but N45 workes as well)
  https://supermagnetic.de/neodym-magnete/scheibenmagnete/stabmagnete-3x8-mm-n45h-120c/
  https://de.aliexpress.com/item/1005009702293312.html