Ontos "Suppressor" Shroud for Rev 2 EX BCAR
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cosmetic muzzle/suppressor shroud made for the Ontos
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 179
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a shroud designed to conceal a Rev 2 EX BCAR attached via the Silly SCAR adaptor by Corvus. To do this it extends about 130mm from the front of the original Ontos.
I wanted something that would enhance the sci-fi appeal of the Ontos, but I'm not a particularly good 3D modeller so I just played around until I had something I liked. I modified the original Ontos collet as a base, opening up two holes ready for M3 threaded inserts that can be set top and bottom when the collet is tightened down. This means I can install my BCAR and adaptor first, get it properly aligned and then just slide the shroud over and secure it with two 6mm or 8mm M3 bolts.
This is still something I'm testing. I'm definitely concerned that shrouding the BCAR so closely will wreak havoc on accuracy, which is why I'm experimenting with some vents/porting at the end. One version has dimples in it as guides for optional holes to be drilled, and another has more aggressive cutaways. I wish I'd keyed the shroud onto the collet too, so I'll likely add that in future.