Bell beast from Hollow Knight Silksong rolling toy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little model of the bell beast from silksong with a wheel on the bottom so she can roll on the floor
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 518
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I thought that the Bell Beast from silksong was cute so i modelled her, then i thought that making her roll around would be fun, so i did that.
extra stuff you need
super glue
M5 nuts x16
notes on printing
All files are oriented and cut in the way that seemed easiest to print for me.
The "square peg" and "wheel half" files must be printed twice, you also need 2 body halves and one must be mirrored.
The pegs that connect the body halves might be tight depending on your printer, you might need to print them at 98% scale (or sand them down later).
notes on assembly
Glue 8 M5 nuts in the holes of each wheel piece, then glue the wheel halves together with the nuts on the inside.
Insert the axle through the wheel. It's supposed to be a tight fit and may require some "convincing".
Connect the body halves with the square pegs and some glue. Press them firmly to minimize the seam line. Sand the sides of the hole so that the wheel doesn't scratch on them too much.
Snap the wheel in the wheel holder, then glue it into place on the body.
Glue the mask to the shell then glue them to the body.
For easier painting i suggest that you paint the mask, the shell, and the glued body before putting everything together.