1 / 6
Prusa Core One Nozzle Wiper V2 Slim (Left or Right!) — zdjęcie 1
1 / 6

Prusa Core One Nozzle Wiper V2 Slim (Left or Right!)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The Prusa CORE One Nozzle Wiper by 6d6178, but without the bulky design. Compatible with G-code just like the original.

Ocena
0 / 5
Polubienia
19
Pobrania
49
Wydruki
0
Wyświetlenia
485
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Both installation sides are now available!

This is a Nozzle Wiper Arm for the Prusa CORE One /+ that uses Bambu Lab A1 silicone nozzle wiper pads.

I am not the original creator of this nozzle wiper/cleaner. I just refined the design to make it more slim and less bulky.

This is definitely my preferred way of printing this nozzle wiper, so I can keep it as low-profile as possible!

I would recommend printing with 20% or higher infill, as opposed to the 15% of the original.

Print works best when printed with the front-face on the heatbed. I would recommend snug supports. Default Prusa Slicer settings work perfectly.

Tagi