Sovol SH-01 Filament dryer replacement latches
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Plastic latches on my dryer got brittle and broke. I modeled replacements off the original parts with some mods
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The latches on my Sovol SH-01 got brittle and one broke completely and the other one was on it's way so I modeled a replacement latch based off the original design beefing it up a little so it's not quite so thin. You may have to drill out the hole with a 1.5mm bit for the pin to slide in easily. To remove the old latches I just took a pair of tweezers and pressed on the pin to pop it loose. After that you just put the new latch in place and reinstall the pin. New latches maintain full range of rotation like the originals. Hope this helps anyone else whose latches have failed.