Polaroid MP-4 Ground Glass
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ground Glass Plate for Polaroid MP-4 Copy Stand Camera
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a two-part print to put a 4x5 ground glass in a Polaroid MP-4 Copy Stand Camera. The Fresnel lens goes in front of the ground glass with the rough surface of the ground glass being sandwiched in between them. Due to how the camera was made, the back is technically upside-down with the insert on the left instead of right.
Hardware Needed:
2x M3x20 Socket-Head Bolts
4x M3x8 Socket-Head Bolts
4x M3 Heat-Press Inserts
6x M3 Nuts
1x 4X5 Ground Glass
1X 4X5 Fresnel Lens
I've also tossed in a tripod adapter, but this requires drilling 3mm holes in the aluminum foot of the camera. It uses 4x M3 heat-press inserts and a single 1/4-20 insert.