Record 778 Rebate Plane Depth Stop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A depth stop for a Record 778 Rabbet Fillister Plane
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I bought my plane complete, but I know there are a lot out there missing the depth stop. I tried the Depth stop for a Stanley 78 plane, but it didn't work on the Record, so went about creating a fairly faithful recreation of the original depth stop.
It does end up with a slight gap between the stop and body of the plane, where the screw tightens down onto it., but this is as per the original. Not sure if the 3D printed part will survive this, so in the next few days I'll create one with a flat back, notched to clear the blade.
Standby, I'll also be releasing a model for the fence as well.