Czechoslovak Retro Decorative Wall Panel / Grid (1970s–1980s)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Iconic 70s/80s Czechoslovak modular plastic tile. Replica of vintage decorative door frame and wall grille.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
About This Model
This model is a 1:1 accurate historical replica of an iconic modular plastic decorative panel produced in former Czechoslovakia during the 1970s and 1980s (originally manufactured by consumer plastic cooperatives like Směr and Plastimat).
Back in the day, these modular tiles were a staple of Central European interior design. People used them to construct semi-transparent room dividers, radiator covers, or as decorative frames mounted on glass door panels.
If you are restoring vintage interiors, fixing a broken original panel on a cottage door, or simply love 70s/80s retro-geometric aesthetics, this model is for you!
Key Features & Interlocking System
Authentic Geometric Design: Precise recreation of the classic floral/curved motif with a central ring layout.
Modular Connection: Just like the original, the frame features side interlocking slots/tabs along the outer border, allowing you to connect multiple tiles together into large decorative walls or grilles.
Original Scale: Designed at the dimensions of original piece (approx. 203,6 × 203,6 mm). If you need different size (like 200 x 200) just let me know.
Recommended Print Settings
Print Bed Area: Minimum 220 × 220 mm
Material:
PETG / ABS / ASA: Highly recommended for better durability and flexibility when snapping tiles together.
PLA: Works fine for purely decorative wall mounts where tight interlocking stress isn't critical.
Layer Height: 0.20 mm (0.4 mm nozzle).
Infill: 15%–20% (Grid or Gyroid).
Supports: Not strictly needed if your printer handles bridging well, though minor supports under the side interlocking joints/slots can help achieve crisp tolerances depending on your printer's tuning.
Note
I've created this model without any AI support, but I've used AI to generate this description.