"Among Us" Checkers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My son wanted an "Angels vs Demons" Among Us checker set. So I made one!
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 453
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Here's a checker set where you DON'T stack pieces for a king. You flip them, and the king is on the bottom. Because of that, I made the bottom and top seperatly with a ring to hide the seam.
Pro-tip: Glue one piece in the ring, and then the NEXT piece in the ring. If you glue them together and THEN put them in the ring, some glue is going to come out (ask me how I know)
Made this on my dual filament printer (sovol sv02), but if you are good with your “pause at height", you should be good on whatever printer you have!
The height for the among-us pieces is 4.5 mm off the build plate, and I did it at a 0.3 layer height.