Side panels for Pironman 5 Mini (Raspberry Pi 5 case)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Side panels for Pironman 5 Mini, in case yours break, scratch, or you just want a different color for your case
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
I made the panels as close as possible to the originals, the only difference is the opening for the USB and micro HDMI ports. In the original panels, there's one opening for each port, and the opening is exactly the size of the port, I think the idea was that the ports would fit perfectly into the openings, but at least in my case, the openings ended up positioned slightly ahead of the ports, which would cause the HDMI and USB cables to not connect properly to the Pi. That's why in my design I replaced the individual openings for a single, very spacious slot.
There's 2 .stl files for download, one for each panel. The default orientation is for them to be printed with the outer side facing away from the printer's bed, if you want to print the panels with their outer face facing the printer's bed, just flip the Y axis by 180º in your slicer software.
I've also made available the .f3d files, to make it easy for anyone who wants to modify the designs for their own project or to create a remix :) (btw, the font they used for writing the case's name is called "Good Times")