Drawer Pulls w/ Labels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drawer Pulls with swappable label inserts.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Drawer pulls designed to be 3D printed!
Utilized M5-0.8x30mm Socket Head Cap screws with washers both sides and lock nuts to mount into 1/2" plywood and they are the perfect depth. If you use 3/4" plywood maybe use a 35mm or 40mm long screws, let me know what you use!
The Cover Plates allow for labels to be added directly in your slicer with the emboss function, and printed directly into a separate plate for easy swapping. They're a nice snap fit and do not use a lot of filament to swap labels on the rare occasion you change your storage!
Also include the simple mounting/centering jig for 2.5" and 5" below the top of the drawer. This will allow simple and accurate mounting of these handles onto your drawers.
I printed out of PLA-CF which probably wasn't the best idea, but they look great and I have not been hurt yet! Printed with 5 walls and 15% infill and no issues from months of use on my heavy drawers without true sliders! You could use less walls and still be fine I am sure. I would recommend painting some supports in the area where the bolts go in. I printed with the "bottom side" down on the plate.
Let me know of any changes you may want or issues you have with the model!