Self-Watering Plant Pot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another Self-Watering Planter that is fully 3d-printable and should help you to make your life easier.
- Ocena
- 4,5 / 5
- Polubienia
- 128
- Pobrania
- 1061
- Wydruki
- 2
- Wyświetlenia
- 4697
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Another Self-Watering Planter that is fully 3d-printable and should help you to make your life easier. Plant your plant like basil and add water, that is it.
Added a pot version without a cutout
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.12
Infill:
20
Filament: Sunlu ABS Red
Notes:
I used ABS, PLA or PETG should also work
Try out if your reservoir is water tight
Before you use your 3D print try out if it is water tight.
I used epoxy just to be sure. It is also possible to use a water tight wood glue.
Category: Outdoor & Garden