1 / 6
Sv08 Modular Reinforced Tophat ready for an MMS — zdjęcie 1
1 / 6

Sv08 Modular Reinforced Tophat ready for an MMS

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A top hat designed to support heavy things. Ready for an MMS or just extra storage.

Ocena
0 / 5
Polubienia
1
Pobrania
3
Wydruki
0
Wyświetlenia
52
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This tophat is planning for a future. 

Constructed of corner pieces and middle panels. Each section can be bolted to the SV08 frame. The pieces fit together like a jigsaw with a relaxed tolerance on the joints. This makes it very simple to swap out parts to add new features.

The supplied middle sections include a recess for 4x2020 or 2x2040 extrusion (520mm long). As well as providing rigidity and support the extrusion is a good platform to add lighting.

This design works well with my modular filter box. I recommended to fit 1mm thick foam strips around all the edges and on top of the extrusion to reduce noise and keep the heat and smells in the chamber.

If you have the glass top panels the extrusion will support the middle edge. I recommend a strip of foam tape across the extrusion just to prevents rattles.

I have tried to make the design symmetric but I recommend printing all the corner parts individually as named . (There is a annoying 0.2 mm difference  somewhere between front an back parts!) Left and right middle sections are interchangeable. Left and right corners are mirrored parts.

As with all large prints that need accurate dimensions - only print this if you have calibrated your X and Y scaling. 

Lighting: I have included a simple LED light bar (in two parts) that rests between the extrusions. The light bar is deigned for 2 strips of 10mm wide 2mm thick LEDs  up to 500mm length.

Metalwork:

M3 8mm bolts will lock the top hat parts in place.

M5 bolts secure the 2040 extrusion (if you had the ends tapped). I used Ooznest to supply the extrusion. ( Good quality and price and a good fit.)

The Fusion 360 files allows other to modify and create their own panels as needed. I have reproduced the SV08 topframe based on files released by Sovol in to the public domain.

Tagi