1 / 3
25x17 Sineklik Köşe Bağlantı Parçası (Tam Uyumlu)  & 25x17 Window Screen Corner Connector — zdjęcie 1
1 / 3

25x17 Sineklik Köşe Bağlantı Parçası (Tam Uyumlu) & 25x17 Window Screen Corner Connector

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I designed this replacement part to repair a broken window screen corner connector. The original part was carefully meas

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
33
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

🇹🇷 Türkçe

25x17 Sineklik Köşe Bağlantı Parçası (Tam Uyumlu)

Bu modeli, kırılan sineklik köşe bağlantı parçasını değiştirmek için tasarladım. Orijinal parçayı ölçerek 3D ortamda yeniden modelledim ve 25x17 mm alüminyum sineklik profiline tam uyum sağlayacak şekilde test ettim.

Eski kırık parçayı çıkarıp bu parçayı yerine takarak sinekliğinizi yeniden kullanabilirsiniz.

Özellikler

  • ✅ 25x17 mm alüminyum sineklik profili ile tam uyumludur.

  • ✅ Orijinal plastik bağlantı parçasının yerine birebir geçer.

  • ✅ Gerçek parça üzerinde test edilmiştir.

Baskı Ayarları

  • Katman yüksekliği: 0.28 mm

  • Doluluk: %50 önerilir

  • Destek: Gerekmez

  • Malzeme: PETG tavsiye edilir. PLA da kullanılabilir ancak dış ortam koşullarında PETG daha uzun ömürlü olacaktır.

en English

25x17 Window Screen Corner Connector (Perfect Fit)

I designed this replacement part to repair a broken window screen corner connector. The original part was carefully measured and recreated in CAD to provide a perfect fit for 25x17 mm aluminum window screen frames.

Simply remove the broken connector and install the printed replacement to restore your window screen.

Features

  • ✅ Perfect fit for 25x17 mm aluminum window screen profiles.

  • ✅ Direct replacement for the original plastic corner connector.

  • ✅ Compatible with the original screen mesh and spline.

  • ✅ Easy to print with no supports required.

  • ✅ Designed and tested on a real window screen frame.

Print Settings

  • Layer height: 0.20 mm

  • Infill: 100% recommended

  • Supports: Not required

  • Material: PETG is recommended for better outdoor durability. PLA also works for indoor use.

Tagi