Swiveling Magnetic Dry Erase Marker Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ensures your Expo dry erase markers are held cap-down with fun swivel action.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Securely hold your Expo dry erase markers in a cap-down position so they are always primed and ready to draw! Gravity will ensure they are always held in the correct orientation. Does it need to swivel? No. Do I think the swiveling makes it more fun? Yes!
Everything is oriented for printing without supports. The Fusion file is included. I imagine folks will want to remix to fit other magnet sizes. Feel free to leave a comment for the magnet size you need.
Instructions
Each marker will need a "Marker End Cap". Start with the tighter variant, and use the looser if you can't get it to fit. These are not meant to be easily removed from the markers.
Print "Base", "Marker Holder", and "Nut".
Press two 8x3 magnets into the "Base".
Add four U.S. Pennies to the back of “Marker Holder”. These are the counter-weight that return the holder upright when the marker is removed.
Place "Marker Holder" over the "Base" shaft and secure with the "Nut". Don't tighten fully, to allow for free rotation.
Attach to white board, add marker, and breathe easy knowing your markers are held in the correct orientation!