Robo3D Cable Chain Servo Cover using In3Designs Chain Link
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I really liked the Servo cover from https://www.thingiverse.com/thing:1154650 but I already had the chain from…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 110
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I really liked the Servo cover from https://www.thingiverse.com/thing:1154650 but I already had the chain from https://www.thingiverse.com/thing:696183 so I just changed the link on the servo cover.
Excellent work from all around. It works beautifully and has plenty of clearance from the threaded rods.
Print Settings
Printer Brand:
Robo 3D
Printer:
R1 ABS + PLA Model
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
30 or better
Notes:
I used supports everywhere so it does not warp or try to print large overhangs
Category: 3D Printer Parts