1 / 3
Diamond Painting Tic Tac Box Labels and Holder — zdjęcie 1
1 / 3

Diamond Painting Tic Tac Box Labels and Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Label system for tic tac boxes

Ocena
0 / 5
Polubienia
2
Pobrania
4
Wydruki
0
Wyświetlenia
52
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I created this so I didn't have to keep using stickers to label my drill containers while using them for the current project. 

Labels include 1-30 and the alphabet. I will include the OpenSCAD file if you want to print other symbols.

To print the labels in two colors, just use your slicer function of "Split to Parts". Then flip the toggle Objects to find the parts that are the letters/numbers and assign a different filament to the top parts.

The label holders must be glued on. I used Loctite Super Glue Ultra Gel Control. It only takes a very small amount. The jig helps keep them all aligned at the same height. I used the jig with the container lid removed which sets it a bit down from the top. 

See also my Tray Label System that I use together with this.

Tagi