1 / 6
4x4  square 6" half round doweled jig for hand beating your own 4x4 square downspout outlets — zdjęcie 1
1 / 6

4x4 square 6" half round doweled jig for hand beating your own 4x4 square downspout outlets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

import with metric scaling at 100% do not modify any values print it as is or it will not be correct

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
13
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

leave the metric scaling at 100% for all values, make your pipe 3.625" if its too tight try to roll your corners better and reduce to 3.5625, 3.5, etc

recommended method : pipe locked not riveted

seam size : .25"

to create your metal pattern take your desired pipe size x 3 , then for the seam side, take half the desired size and add your hem size to the number

example

3.625" desired pipe size, with .25" pipe lock : 

3.625" x 3 = 10.875

add half of the desired size and your hem TWICE : 3.875 / 2 = 1.8125 = .25 = 2.0625 for even pipe lock split in the middle

10.875 + 2.0625 + 2.0625 = 15"

total stretchout of your strip SHOULD be 15"  x 3". you need to use a compass to trace your dowel so you must mark center between the 2.0626 and 5.6875 to mark the perfect dowel with your compass 

mark your hem at .25", 10 degree kick at .5" on both sides for a proper pipe lock. to keep it simple mark .25" on the left, .5" on the right. then flip the piece 180 degrees to the other side that doesnt have marks, and on the left side of that mark .5", and on the right mark .25

note if you have a flat nose brake that doesnt roll the hem at all and your hem is the same sizes as the kick, just mark your kick at 9/16" instead of 1/2

.5 radius rolled bends will be at 2.0625" and 5.6875 coming in from the left and right.

NOTE: i have not yet field tested this, but my brackets are yielding a true 5.5" half round / 2.75" radius dowel, the straps seem to bring the radius tigher, so i added a second file at 5.5" half round modified to fit these exact straps.