RearCam — Back-Strap Action Camera Mount for Baseball Caps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Action cam mount for cap straps. Film behind; flip cap backwards for front filming. Built-in supports, w/ GoPro mounts.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Most cap camera mounts sit on the front brim and scream "I'm filming." This one clips onto the back adjustment strap — low-profile, unobtrusive, and perfect for capturing rear-facing POV. Great for cyclists watching traffic, urban commuters, content creators doing walk-and-talks, or anyone who wants hands-free rear footage without a helmet rig. Wear cap backwards to film forward too.
🔧 Design features:
Tall, stable body — the mount extends downward along the strap rather than towering above it. This keeps the camera's center of gravity low and prevents it from levering or sagging during movement. The curves of the body also wraps around the head for stability.
8.5mm wide strap channel — generously sized to fit both the folded (thick) side and single-layer (thin) side of any adjustment strap. Snapbacks, strapbacks, velcro — it works
Open-bottom design — slides onto the strap from above without removing the buckle. No need to unthread your cap
Suspended retaining structure — the strap is held securely within the body cavity, keeping the mount locked in place even during active use
Built-in breakaway supports — the model includes integrated print supports at the bottom and sides, tested to survive nozzle travel without getting knocked off. Simply snap (bottom supports)/trim (side supports) them away after printing
🖨 Print settings:
Material: PLA or PETG
Walls: 6 perimeters for strength, 25% infill.
Supports: None needed — built-in supports are part of the model. Just print and snap off
Orientation: Print in the provided orientation.
🔩 Hardware required:
1× standard GoPro thumbscrew + nut (use the one from any GoPro accessory)
🧢 Fits:
Standard baseball caps with back adjustment straps
Tested on snapbacks and strapbacks
Channel width 8.5mm accommodates folded and single-layer straps
Tighten the straps to ensure stability.
Also checkout the BrimCam.