6.5mm rope splicing fid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fid intended for splicing 3/16 - 1/4" (4.7 - 6.3mm) synthetic winch cable. Buttress supports are included.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 217
- Wydruki
- 1
- Wyświetlenia
- 1245
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A fid intended for splicing 3/16 - 1/4" (4.7 - 6.3mm) synthetic winch cable. Buttress supports are included for a vertical print orientation. No additional supports are needed. Overall length is about 140mm. The fid is hollow for approximately 100mm. The internal volume terminates in a cone shape similar to the exterior.
Printing with a wide brim is suggested for better stability. I specified 4 walls & 49% infill. Post processing should include trimming off the buttress supports, filing or sanding off the nubs and overall sanding for a smooth finish.
A 5mm hex driver makes a good support for sanding.