Azeron Cyborg Extended Knuckle Paddles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extended knuckle paddles for the Azeron Cyborg gaming keypad.
- Ocena
- 5 / 5
- Polubienia
- 50
- Pobrania
- 571
- Wydruki
- 0
- Wyświetlenia
- 6209
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
The Azeron Cyborg is a highly customizable gaming keyboard that's largely 3D printed. All of the paddles are around 2mm thick, which is great for most of them. Actuating the knuckle paddles means I have to take my finger completely off of the home row, which isn't the best thing in the middle of a fight. So I made some extended knuckle paddles. There is an 11mm version and a 8mm version.
I recommend printing them on one side as the screw hole diameter is critical for smooth operation. You'll have to use supports for the screw hole, and be sure to clean all the support material off. If there is any material left, it could interfere with the smooth return movement of the key and cause it to bind.