~1/4 Scale ACA "Performance Plus" Penetrator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A functional model of the Eden Prairie MN PPP-15 modeled by Haroldhihat!
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 132
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Welp, with the permission of Haroldhihat, I was able to revive a siren that he made back in November 2025!
The things that I have done to update this is fusion-ifying most of the parts and editing the rotator dimensions to match up with the actual siren better. + Some parts like the rotor, stator, intake, and horn are from his P-10/15/Allertor model
SOME THINGS TO NOTE:
The siren is perfectly outdoor safe if printed in the correct filament! (I recommend PETG for outdoor use)
You can interchange between the Penetrator and the type 1 and 3 Allertor projectors, but if you decide on using the Allertor projector you might have to use a counterweight due to it making the siren more front heavy
The mounts can be found on the original Penetrator/Allertor page
Shaft couplers allow the rotor to be removed and put back in infinitely without needing a tolerance tool or a press-fit rotor
The siren should take around 1-2 rolls of filament total to complete (if there aren't any print fails)
PARTS LIST:
MOTOR: https://www.amazon.com/CHANCS-Electric-555-8000RPM-Accessory/dp/B0CW61NGF4/ref
ROTATOR MOTOR: https://a.co/d/036u4QXY
SHAFT COUPLER(S): https://www.amazon.com/12Pcs-3-17mm-Coupling-Connector-Airplane/dp/B0DKT5T64L/ref
SLIP RING: https://www.amazon.com/Comidox-CIRCUITSx2A-Capsule-Electrical-Equipment/dp/B07H2SRMXP/ref
HARDWARE KIT (M3): https://www.amazon.com/Machine-Assorted-Assortment-Stainless-Threaded/dp/B0DFWYBJJJ/
BRASS HEATED INSERTS: https://www.amazon.com/dp/B08BCRZZS3?ref
ALAN WRENCH: Any LONG 1.5mm alan wrench will work but the ones that come with the coupler are not long enough.
POWER SUPPLY:
SPEED CONTROLER: https://www.amazon.com/RioRandTM-Upgraded-6V-90V-Motor-Controller/dp/B00F839VNQ/ref
INSTRUCTIONS!!
I think on how to build this should be kinda self explanatory since the performance plus isn't too different from the normal penetrator, except for the fact that on the performance plus you don't need to do the whole gearbox setup as this siren has a separate motor for the rotation. However soon I might make an assembly video.
If you need further help, contact either me or Haroldhihat through his discord server.