QDX heat sink adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
QRP Labs QDX 4xPA transistors. For 2N7000 pinout (easiest) and some alternatives for BS170 pinout.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v3.0
When using the QDX on the higher bands (20 to 6m) on wspr mode there is a noticable frequency drift during transmit and also during subsequent receive. This design uses a copper bar 5x15x33 mm size as a heat sink or reservoir. In the first model TO92 transistors are mounted upside down and hence need to be of the 2N7000 config and not the BS170 config. The second model is for BS170 true config and has to be clamped to the side of the bar as shown in the last 3 pictures. The design is made in Design Spark Mechanical and printing was done on Prusa MK4S using PETG material. The third model is using metall filled epoxy glue and a standard alu heat sink glued on top (jig is included).
Also included files for the top section of the QDX case.
Printed with support material.
Link for the copper bar: