BNC-Cover for Tektronix TPS2012 Scope
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement for the often missing BNC-Cover of the Tektronix TPS2012 (TPS2000 Series) 2-channel oscilloscope
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I scored a used Tektronix TPS2012 oscilloscope of the TPS2000 series (two isolated channels, battery operated). And of course the BNC-Cover, which protects from the high voltages that this scope is capable of working with, was missing.
So I designed a suitable replacement. It is optimized for easy printing: to avoid the difficult overhang on the lower fillet when printing upside down (to avoid supports), it is designed as a massive block, at the cost of needing supports around the BNC-openings.
I recommed to use PETG (which I used) or ABS for printing.