Fully Customizable Simple Badge Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cases/protection/customization for standard RFID badges.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 54
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- GNU General Public License v2.0
Badge holder. Designed to hold standard RFID badges.
There are several versions available, all consisting of a bottom part and a top part.
The two parts must be glued together. A tool is available here to help with alignment. Place the bottom part inside the base, apply glue to the contact surface, position the top part, then press down using the pressure piece.
Some models are MagSafe-compatible. I use these, available on AliExpress.
Don’t forget to enable the mounts for MagSafe models.
They are fully customizable. You’ll find a few examples in the photos.
The best quality is achieved when details are printed on the plate. Generally, two layers of color are sufficient.
Default
The original model. The badge is locked inside.
Extended
Identical to the “Default” model, but with holes at the top or bottom. The height is also increased.
Sliding
The badge is no longer locked inside but can be removed using the sliding mechanism.