Hand Crank Top Spinner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple hand crank device using a drill chuck to hold and rotate spinning tops for coloring.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple spinning top coloring turner with minimal hardware.
Link to drill Chuck - Keyless Drill Chuck for Milwaukee,1/2-20UNF Mount 1.5-13mm Self-tighten Drill Chuck for Multiple Purposes,Including 3/8" SDS-Plus Shank,1/4" Hex Shank,1/2" Impact Wrench Adapter - Amazon.com
See PDF for full parts list.
Print Settings
0.2mm layer height
20% infill
3 wall loops
Assembly instructions
Print all parts and remove support from handle.
Press fit 4 bearings into the arm, make sure to add the spacers in between the bearings inside of the bore
Press the heat set insert into the large gear
Screw the large gear onto the arm through the bearings, including a shim in between the bearing and the gear.
Glue the handle and hex shaft to the large gear
Install the set screw and shaft into the small gear
Push the shaft through the bearings on the arm and add a shim to the end
Install the drill chuck to the other end of the shaft.
Press and/or glue the assembly onto the base
Optionally screw the model onto a larger base for added stability.
Test the model.