FlyLens 85 - Modular Camera Mount and Battery Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular two-piece camera and battery mount for the FlyLens85
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
Description
This is a modular add-on for the FlyLens85.
It consists of a small camera mount (GoPro style) to mount a small action cam like the RunCam Thumb Pro W 4K and a small backpack to strap mount a LiPo, replacing the original friction fit mount the drone comes with.
The CamMount can be used standalone or together with the BatteryHolder_Module.
There is also a BatteryHolder_Standalone version which can be used in case you don't need the CamMount.
I also provide all the STEP files in case you need to make modifications to the design.
Print Details
Print in TPU 95A.
The battery holder needs minimal support (see slicer image). The three grooves which can be filled with glue or some rubber strips don't require support and can be bridged.
Mounting
Battery Mounting
The strap slots are 11mm wide. Currently I use 10x115mm straps for my 2S 850mAh LiPos.
The BatteryHolder also features three 4x14mm slots for anti-slip rubber pads
For straps and rubber pads I currently use these ones from BetaFPV.
Hardware
To mount everything you need the following hardware:
Object to mount | Mounting Hardware |
|---|---|
CamMount (standalone) | 3x M2x4mm (BHCS) |
CamMount + BatteryHolder_Module | 1x M2x4mm (BHCS) |
BatteryHolder_Standalone (standalone) | 2 x M2x5mm (BHCS) |
Camera Attachment, e.g. ThumbPro W Basic Mount | 1x M2 Nut |