Solderable In-Circuit Oscilloscope Probe with x10 Attenuation
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Solderable In-Circuit Oscilloscope Probe with x10 Attenuation
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Math
- Licencja
- Creative Commons — Attribution — Noncommercial
This 3D-printed enclosure is designed to house the internal components of an oscilloscope probe, allowing connections to be soldered directly onto devices under test. It also enables quick and convenient reconfiguration of connections with minimal effort.
The design provides a practical hands-free solution for probing signals while maintaining the probe's standard 10x attenuation (or higher, depending on the oscilloscope probe used). This makes signal measurements faster, more reliable, and easier during development, testing, and debugging.
Material needed:
Adhesive Conductive Copper Foil (for shielding): https://s.click.aliexpress.com/e/_c3fEggib
Rocker Switch (10x15mm): https://s.click.aliexpress.com/e/_c3jSr5Lt
Cheap 10x oscilloscope probe: https://s.click.aliexpress.com/e/_c3PDaXXp
Round Hole Female Header: https://s.click.aliexpress.com/e/_c3QVUiMR
Coaxial Cable Wire (you might get along with savaging the probe cable): https://s.click.aliexpress.com/e/_c4TsD2Ax
Colorful wire for wire probes: https://s.click.aliexpress.com/e/_c4Cl2lHH