Adapted FTC DECODE Goal for Outreach - 19502
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapted FTC DECODE goal that takes up less space for outreach and can fold flat for easy storage and transport.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
DECODE was an exhilarating season! We could not wait to bring some of that excitement to our outreach events, allowing both adults and young children to drive our robot around and launch "artifact" balls into the goal with automated aiming. The challenge, however, is that the DECODE goal structure from the field kit is simply too large to transport to outreach events. Additionally, the classifier is too large for the 4ft by 4ft field set-up (4 foam tiles) that we are often limited to in floorspace for many of our events. We decided to adapt the DECODE goal to make it smaller for transport, starting with removing the classifier ramp while still having an "artifact" ball chute. We hope your team finds these goal modifications helpful in your own outreach events!
Check out our article for more information: https://themomentmakers.org/2026/07/26/decode-goal/
We have two folders, one for a version of the parts with M4 holes and one with M4 heat-set nuts. The required heat-set nuts would need to be 5.6 mm in diameter and no more than 10 mm in depth.
If you want to use these modifications for the blue goal, you can mirror the parts before printing.
Contact us if you have any questions: https://themomentmakers.org/contact/