Pool Noodle Connector - No Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pool noodle connectors for standard 2.5" - 3" pool noodles. Works with 2" noodles if scaled by 0.76.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 292
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
Please Note Before Printing
This model is considered experimental and has not been tested; I currently do not have a 3d printer available in order to print test this model. f3d versions are included in case you want to directly modify the model. Feel free to use cords instead of the provided chain.
Print Orientation
The connectors themselves were designed to be printed vertically, with the cross facing upward, as printing horizontally will require supports and might not be the best orientation for the internal channels, however, the chain links and link ring must be printed horizontally. Printing in PETG is recommended
I'd highly appreciate it if you could post makes, photos, or any feedback on how the model turned out, for future improvements or updates.
Changelog
2026-07-26 (v1.0)
- Initial release.