Multi Spool Holder - Up to 4 spools in a compact package!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spool holder capable of holding 4 filament spools without taking up much space! Based off BambuLab's AMS Lite.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 256
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
This is a compact filament spool holder capable of holding up to 4 filament spools at a time, designed for easy use with any MMU (Multi-Material-Unit).
This can be assembled without any tools or additional materials, here is how you assemble it:
Slide the 'lower body' through the top of the 'stand', until the triangular holes on both the stand and body line up.
Put 4 inserts through both sides of the prints to hold the prints in place. (This may take some force)
Repeat steps 1 and 2 for the 'upper body'.
Screw the 'spool holder' prints using the threads on the ends of them. (Don't apply too much force when rotating if you feel it is stiff, and don't thread them in too far to avoid breakage.)
(Based off BambuLab's AMS Lite)