Chevy 90mm push fit center cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My Silverado center caps were craked and broken when i bought it. They were just simple push fit crap aftermarket caps…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
My Silverado center caps were craked and broken when i bought it. They were just simple push fit crap aftermarket caps anyway so anything was an improvement. These have a 90mm ring which is just shy of the center bore of my wheels. I put some wire wrap cloth tape around the rim just to make it snug and give it some grab to stay in there. I also tried some thin foam tape that the old push fit ones used and that worked too (you can see the foam tape in the photo of them painted on the brick). The flat disc outer logo is 97mm and fits flush to the rim (i had to use a pick to remove it when test fitting before adding tape.)
EDIT 1/28/25: Lost a cap on the road somewhere so i may as well redesign it a bit. Added a v2 with a slightly larger inner cylinder. Also now have a blank face, Chevy face, and dragon face (becase dragons are cool). Went with more of a line art style this time to make the print slightly cleaner especially with my peo carbor fiber sheet.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
No
Category: Automotive