Mammotion Luba Cutting Disc Screw Coating Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small jig for holding replacement cutting-disc screws while applying Vibra-TITE VC-3.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 1
- Wyświetlenia
- 50
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Replacement cutting-disc screws are not available directly from Mammotion, and finding the exact M4 × 8 mm stainless steel screws with a pre-applied nylon locking patch is surprisingly difficult.
A practical alternative is to buy standard stainless steel M4 × 8 mm screws and apply Vibra-TITE VC-3 to the threads. Once dry, VC-3 provides a reusable locking effect similar to the nylon-patch coating on the original screws.
These are tiny screws. Holding them with your fingers while brushing on VC-3 is awkward and usually ends with more coating on your hands than on the screws. This simple jig holds the screws securely with their threads exposed, making it much easier to apply an even coat without gluing the screws to your fingers or work surface.
What you’ll need:
Two screw options are provided. Option 1 is closer to the original, and option 2 works just as well but with a different driver type.
(Amazon Associate links)