Detailed Bicycle Assembly (Movable Parts + SLDPRT Files)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Experimental bike assembly with stylized, oversized chain for easy FDM printing.3MF/SLDPRT included. Chain needs support
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Share Alike
A highly detailed CAD model of a classic bicycle, provided as a full assembly rather than a single static mesh. By opening the .3MF file, you will find that the components (frame, wheels, pedals) are separated.
Disclaimer (Experimental): While the parts are designed to be separate and potentially movable, the exact mechanical tolerances have not been fully tested. Consider this an experimental project! It might require some sanding or tuning to get the wheels spinning perfectly.
IMPORTANT - The Drive Chain: The drive chain is a separate floating shell for aesthetic detail and is not physically linked to the gear teeth. If printing the assembly in place, the chain ABSOLUTELY REQUIRES SUPPORTS directly underneath it.
Bonus: I have included a .ZIP file containing the native SolidWorks files (.SLDPRT)
3D printing settings
Difficulty: Advanced / Tinkerer.
Format: Use the .3MF to access the separated assembly parts.
Wheel Spokes (CRITICAL): Due to the delicate nature of the thin spokes, drastically reduce your outer wall print speed (e.g., 30-50 mm/s) for the wheels. Fine-tuning your material flow rate and retractions is highly recommended to prevent stringing between the spokes.
Chain Supports: If printing the assembly in place, activate supports ("Everywhere") specifically to catch the floating chain geometry.
Scale: Scaling up the model is highly recommended for the thin spokes and to make tolerance tuning easier.