Jointed Carnotaurus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jointed Carnotaurus
- Ocena
- 4,333 / 5
- Polubienia
- 139
- Pobrania
- 311
- Wydruki
- 2
- Wyświetlenia
- 1739
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a Carnotaurus model consisting of 11 parts, with an assembled length of about 25cm and capable of limited articulation.
The leg joints are printed as a single piece, with a 0.2 mm gap reserved for movement. If the joints cannot move, it means the dimensions are inaccurate and the X-Y contour compensation value needs to be adjusted by approximately -0.1. A test file is included, and it is recommended to print it first.
Notes:
- Supports required.
- Recommended material: PETG for longer-lasting joints, though PLA can be assembled fine too.
- The spikes on the back and arms are a bit pointed—please just be careful during assembly
- The model has smaller feet, so it takes a little skill to get it to stand.
-----
[Oct 23 Update]
Just launched my Patreon!
Become a paid member to suggest ideas and vote on the theme for my next poseable model.