Mini Anvil Earring — 3D Blacksmith Anvil Charm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tiny London-pattern anvil earring, modelled fully in the round — tapered horn, overhanging working face, waisted body
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 13
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
A tiny blacksmith's anvil you can wear — a real 3-D London-pattern anvil, not a flat silhouette. It has the tapered horn (beak), a working face that overhangs the body at both ends, a pinched waist, a squared heel and a spread base, so it reads as an anvil from every angle.
A small pierced eye at the heel (the anvil's own pritchel hole, drawn up just enough) takes a jump ring, so it hangs horn-down and dynamic. No fat bead stuck on top — the hang feature is forged into the shape.
Size: about 27 mm horn-to-heel. A charm for blacksmiths, farriers, jewellers, metalworkers, or anyone who loves the forge.
Print settings
Supportless — the STL lays the anvil on its cheek (flat side down), so every overhang is gone and the broad face points forward when worn.
0.2 mm layers, 3 walls, 15% infill, PLA or PETG.
Print two for a pair (the SCAD has a part=pair layout, or just print the single twice).
Add a jump ring through the heel eye and a standard ear hook.
Fully parametric
Open the SCAD to change overall size (sf), every body proportion, the horn length/taper, and the hang style: hang=eye (pierced heel, default), ring (a small forge-welded loop on top), or hole (a bare bored hole, zero protrusion). part=earring (display) / print (bed-ready on its cheek) / pair.
License: Creative Commons — Attribution. Personal and commercial use OK, attribution appreciated.