1 / 8
Creator 5 Pro Extruder Vent Filter with PTFE tubing slip fit connection — zdjęcie 1
1 / 8

Creator 5 Pro Extruder Vent Filter with PTFE tubing slip fit connection

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Creator 5 Pro Extruder Vent Filter with PTFE tubing. The extruder vent actually emits a lot of VOC's and particulates.

Ocena
5 / 5
Polubienia
43
Pobrania
172
Wydruki
2
Wyświetlenia
1571
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Creator 5 Pro Extruder Vent Filter with PTFE tubing slip fit connection.

The extruder vent actually emits a lot of VOCs and particulates.  This happens because the chamber recirculation filter fan and the chamber intake fan blow at the printing part and then at the extruder vent.

This print file allows you to install activated carbon sheets to lessen the VOCs and particulates expelled from the printer.  It also allows provides PTFE tubing slip fit connections to the printer.

I printed with the PTFE tubing holes vertical with supports.

Require qty8 5mmx2mm magnets

Tried to print PLA first but it warped.  So printed in ASA.  Also screwed it to the printer by removing the extruder dock panel and using M2 screws.  See here to take off the extruder dock panel: 

Tagi