Rear Upper Trailing Arm Bushing for Mitsubishi Pajero Mini
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a two piece bushing made for the upper trailing arms of my 1995 Pajero Mini.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Print the bushing out of TPU at 95-98% infill using a gyroid pattern, and reuse the original metal bushing sleeve. You'll need to cut the metal sleeve and fully remove the old bushing from the trailing arm before installing this new one.
Note that this bushing is made only for the side that attaches the trailing arm to the body of the car, not the side that attaches to the axle. The axle-side bushing is much more robust and usually doesn't go bad as quickly.
The two parts are identical, I just included two of them, so it doesn't matter how you orient them. Use plenty of grease to work them into the trailing arm, and you'll most likely need a rubber mallet to seat them fully.
NOTE: I am not responsible for any injuries involved in using this part. Use it at your own risk.